Tested/Qualified by Leading Optical Drive Manufacturers (Liteon, HP, etc) JMicro Chipset Solution Plug and Play Convert SATA to PATA Device Instantly No Need for SATA Data or Power Cable

Save hundreds of dollars with this converter!

You don't have to upgrade your PC mother board, memory or CPU in order to benefit from the speed and capacity boost of a SATA device! This item is a converter solution for SATA (Serial ATA) storage devices (Hard Disks or internal optical drives). It has a standard 22-pin SATA port as an interface to a SATA drive. It accepts Parallel ATA (IDE) commands through 40-pin IDE connector from PC mother board, decodes PATA commands and converts to SATA commands. Responses from SATA drive are deciphered, processed and converted to a PATA protocol and sent to PC. This PATA to SATA adapter allows you to replace / install SATA drive to older computers which are without SATA ports. Technical Details: Plug and Play, No drivers needed Serial ATA (SATA) compliance with Serial ATA 1.0 Allows SATA device to be fully compatible with standard IDE and power cables Parallel ATA (PATA) Ultra ATA/133 parallel Interface Supports: Windows 98 / NT 4.0 / 2000 / ME / XP, Linux Connectors: SATA: Signal + Power Female PATA: IDE 2X20 pin male connector with molex power connector Jumper setting: master/slave jumper (Default "ON" as master device). Used when two devices connected on one IDE cable. Size:W 98mm xD 20mm xH 27mm Simple connection demonstration:

Tested/Qualified by Leading Optical Drive Manufacturers (Liteon, HP, etc) JMicro Chipset Solution Plug and Play Convert SATA to PATA Device Instantly No Need for SATA Data or Power Cable

Save hundreds of dollars with this converter!

You don't have to upgrade your PC mother board, memory or CPU in order to benefit from the speed and capacity boost of a SATA device! This item is a converter solution for SATA (Serial ATA) storage devices (Hard Disks or internal optical drives). It has a standard 22-pin SATA port as an interface to a SATA drive. It accepts Parallel ATA (IDE) commands through 40-pin IDE connector from PC mother board, decodes PATA commands and converts to SATA commands. Responses from SATA drive are deciphered, processed and converted to a PATA protocol and sent to PC. This PATA to SATA adapter allows you to replace / install SATA drive to older computers which are without SATA ports. Technical Details: Plug and Play, No drivers needed Serial ATA (SATA) compliance with Serial ATA 1.0 Allows SATA device to be fully compatible with standard IDE and power cables Parallel ATA (PATA) Ultra ATA/133 parallel Interface Supports: Windows 98 / NT 4.0 / 2000 / ME / XP, Linux Connectors: SATA: Signal + Power Female PATA: IDE 2X20 pin male connector with molex power connector Jumper setting: master/slave jumper (Default "ON" as master device). Used when two devices connected on one IDE cable. Size:W 98mm xD 20mm xH 27mm Simple connection demonstration: